How to Perform Pulse Calibration on the XYPD-02D Digital Partial Discharge Detector

Detailed Illustrated Operating Instructions

1

Product Structure

1. Display: 15-inch true-color TFT LCD with industrial-grade high brightness; display resolution: 1024×768; voltage value displayed on a 4-digit digital tube.

2. External interfaces: USB port; power port; 2 signal input ports; ground terminal; external sync signal input terminal; RJ45 port; RS232 port.

3. Dimensions: length × width × height (540×460×320)mm.

4. Weight: 18kg.

2

Operating the Partial-Discharge Test Software

1. Main screen

Open the partial-discharge measurement interface as shown below:

The interface has three parts:

(1) Discharge-status panel;

(2) Waveform display window;

(3) Channel control panel.

2. Calibration

To perform partial-discharge measurements, first connect the external test circuit and correctly connect the hardware modules of this digital partial-discharge test system. You can then proceed with calibration.

The system automatically calibrates the calibration value using a computer, making operation very simple for the user.

3. System parameter settings

During partial-discharge testing, it may sometimes be necessary to set the filter range, display effects, and other parameters. Click the button on the toolbar to open the system parameter settings panel, as shown below:

4. System display modes

The partial-discharge test display window has three modes: sine-wave mode, ellipse mode, and line mode. They are shown below:

4. Test report

After the software test is complete, if you need to print a test report, click the toolbar icon to open the test-report information editing window. The interface is shown below:

The system’s test reports are in WORD document format.

3

Data Analysis

The digital partial-discharge test system provides test-recording and analysis functions, allowing users to analyze sampled partial-discharge data at any time after testing is complete.